How to choose a fishing LED?

Nov 17, 2025

Leave a message

In deep-sea fishing and nearshore aquaculture, the "fish lure efficiency" of fishing lights is crucial for determining the catch. While fishermen traditionally used bulky metal halide lamps, LED lights are now the preferred option. However, the market offers a wide range of LED fishing lights at various price points, which can lead to costly mistakes if the wrong choice is made.

As a manufacturer of LED light sources for fish lights, we've encountered many customers frustrated by issues like inadequate brightness, poor heat dissipation, and short lifespan. Selecting the right LED light source for fish lights can significantly enhance fishing efficiency while reducing maintenance and electricity costs. In this Blog, we'll cover how to choose a reliable fishing LED, focusing on basic parameters and cost analysis.

 

1. The core of a fishing light is not to "illuminate", but to "attract"

Many people mistakenly believe that a fishing light is a "strong searchlight", but in fact, it is completely the opposite.

The response of fish to light depends on three key factors:

• Spectral & wavelength (Color)

• Light intensity (Brightness)

• Illumination method (Flashing/Constant light/Moving)

For example:

• Squid and cuttlefish prefer blue-green(Cyan) light (470-520nm) and have almost no sensitivity to white light.

• Sardine and mackerel will be attracted by high color white light, especially in turbid waters.

• Shrimp are more sensitive to the combination of ultraviolet and blue light.

• And some deep-sea fish only gather under specific frequencies of flashing light.

Actual case:

In the waters off Peru, fishermen use 520nm pure green LED, which increases fish catch by 40% compared to white light.

In Hokkaido, Japan, purse seine fishing boats use 6000K cool white light combined with diffuse reflection on the water surface for the best effect.

There is no "all-purpose light", only "the right light".

 

2. Four key elements for choosing a suitable LED for fishing lights

1) Power and brightness considerations

The core of the fishing light LED is "Brightness", but high brightness does not mean high power; it needs to match your boat type and water area.

The entry-level 500W is suitable for small nearshore vessels, covering a water surface of 10-20 meters; The high-power 2000W is aimed at the deep-sea trawl, with a projection depth of over 50 meters.

Key indicators: The light efficiency should be at least 130 LM/W, and high-power COB LED modules can reach 150 LM/W easily. It's better not to use a single SMD LED module for fishing lights above 1000W, in order to avoid poor heat dissipation, causing dead lights or significant light decay.

Tip: Choose the flashing mode (5-10Hz) to simulate the brilliance of jellyfish for fishing squid at night; the Stable light mode is more suitable for sea bass aggregation. Don't be greedy for high power; using the small boat too much will significantly reduce battery life can lead to power overload and reduced endurance.

Wrong choice, fish schools take a detour; You made the right choice, you'll have a huge harvest in one night!

 

2) Spectrum & Wavelength considerations

Different fish are sensitive to different types of light, and not all colors work. The key to the LED light source of the fishing light lies in its wavelength: Green light(500-550nm) attracts plankton, and Blue light(450-490nm) hits the eyes of deep-sea fish directly.

Why do fish prefer green and blue light? These wavelengths penetrate the water surface strongly, triggering the food chain effect - small shrimp and fish come, and the target fish naturally follows. Red light or white light? If it's too dazzling, the schools of fish will be scared away.

Practical suggestion: RGB adjustable LEDs are more flexible, and the APP controls one-click switching. For the coastal fisheries in Southeast Asia, COB LEDs with a high proportion of green light spectrum are more popular and can increase the annual capture rate by 20%.

Remember, if the wavelength is incorrect, it is equivalent to wasting electricity - choose the right spectrum, and the school of fish will automatically come knocking.

 

3) Heat dissipation and reliability considerations

The accumulation of heat during high-power operation of fishing lights has always been the top issue, as the quality of LED heat dissipation affects the lifespan of the LED lights directly.

Pain points on the current market: Ordinary SMD LEDs and COB LEDs are usually packaged with gold wires. Due to the use of more gold wires at high power, continuous high temperature will cause excessive internal resistance of the gold wires, resulting in high heat generation, intensified light decay, rapid decrease in brightness, significantly shortened LED's lifespan, and the risk of dead lights and flickering caused by gold wire collapse or poor soldering.

Recommended solution: It is recommended to use the high-power flip chip COB LED light source. This type of high-quality LED will use a high thermal conductivity aluminum substrate (with a thermal conductivity coefficient of 3.0-8.0W/m · K) without gold wire packaging, which has low thermal resistance, low light attenuation, and no risks caused by gold wires. It can work stably and continuously for 24 hours, with a lifespan of up to 50000 hours.

In general, when the board size and power are the same, the heat dissipation performance of COB LED light sources is stronger than that of SMD LED light sources.

 

4) Waterproof and anti-corrosion considerations

The salt spray corrosion of seawater is extremely strong, and ordinary SMD LED modules will experience problems such as rusting of LED beads, short circuits caused by shell leakage, and dead lights after 1-2 months of use. Although some manufacturers may spray glue waterproof treatment on the LEDs, it will invisibly increase the cost of additional materials, production, and labor.

The COB LED module utilizes a special silicone sealing process, naturally providing secondary waterproofing and corrosion resistance. No need for secondary sealing treatment, indirectly saving a lot of costs. Of course, relying solely on the waterproof and corrosion-resistant properties of LEDs is far from enough. More importantly, the lamp shell needs to meet these requirements.

Our customized COB LEDs for Vietnamese aquaculture customers have been used continuously for 18 months in a salt spray environment, with a light decay rate of only 5%, significantly lower than the industry average of 15%, thereby reducing the frequency of lamp replacement.

 

5) Cost-Effectiveness Considerations

Choosing a fishing LED requires considering the long-term cost-effectiveness, not just focusing on price - including power consumption, lifespan, and efficiency. High-quality fishing LEDs are more cost-effective.

Assuming the same 2000W fishing LED, brand A costs 55 USD/pcs and brand B costs 35 USD/pcs. The light efficiency of lamp A is 130 LM/W, and lamp B is 90 LM/W; lamp A can last for 3 years, while lamp B begins to fade after 1 year.
Let's do the math:

• Lamp A's total annual lumens = 130 × 2000 = 840000 LM

• Lamp B's total annual lumens = 90 × 2000 = 260000 LM
To achieve the same lighting effect, at least 3 lights of lamp B are needed to catch up with lamp A, resulting in a higher total cost and two additional risks of failure.

The high-power flip-chip COB LEDs have high luminous efficacy, low light decay, and require less maintenance. It can generally be used for more than 3 years, avoiding the cost of frequent lamp replacement and making it an ideal choice for LED light sources for fishing lights. Achieving great results with minimal investment is true wisdom for fishermen.

info-1200-900

3. Customization is the best choice: we can meet your needs

Most LED manufacturers for fishing lights on the market always sell "inventory" - fixed power, fixed color, fixed function. But we are well aware that every sea area is a unique battlefield.

Over the past six years, we have collaborated with clients from over 20 countries worldwide to complete more than 60 customized fishing light projects, including:

• Driverless 520nm green squid fishing light: specially designed for the waters off Peru, IP68 protection, surge resistance, single lamp power consumption reduced by 25%, capture rate increased by 35% compared to previous SMD LED lamps.

• Dual color white light and tunable Cyan-Green light switching system: used for Taiwan's deep-sea fishing fleets, supporting automatic switching of lighting modes.

• Ultra-thin underwater fishing light: With an LED board of only 1mm thickness, it can work continuously for 6 months without any malfunctions.

• Mooring buoy fishing light: Powered by solar energy and lithium batteries, for unattended fish-attracting areas.

• Ice-resistant polar fishing light: Starts normally at -40℃, for cod fishing near the Arctic Circle.

Our core engineering capabilities:

🔬 Spectral customization: can provide any single color or combination spectrum, such as 450nm (blue), 520nm (green), 395nm (UV), etc.

🔧 Multi-process support: providing eutectic, powder coating, and powder deposition packaging technology support to better optimize LED heat dissipation structure, extend lifespan, and improve reliability and durability.
💡 Optical design: Customized lens angles (15°–120° optional) based on operating distance.
⚡ High-efficiency drive: Independently developed and designed circuits, supporting the design of AC/DC high voltage (110V/220V/380V/410V/700V/800V) or dual voltage inputs.

We don't make LEDs that "look bright."
We make light that attracts fish.

 

When selecting LED light sources for fishing lights, it's not enough to just look at power, spectrum, heat dissipation, and waterproofing. It is quite necessary to find a reliable LED manufacturer as a partner. The market is rife with substandard products, and savvy customers have long turned to customization.

Our Vietnamese client has been customizing high-power flip-chip COB LEDs for fishing lights from us since 2018. So far, they have used over 10 types of LEDs in bulk, and the annual purchase quantity of LEDs has increased from 5000 in the first year to 200000 now. The company has also grown from 3 employees to 500, and its annual revenue has seen a visible exponential increase.

 

WELCOB, not only manufactures high-quality LED light sources but also helps you light up the path to wealth at sea.

If you are not satisfied with the current lighting effect or are planning to upgrade the lighting system on board, please feel free to contact us at any time. We support small-batch trial production, mass delivery, and OEM cooperation, serving fishing light customers worldwide.