Hey there! As a supplier of IR COB LED, I often get asked about how to measure the luminous intensity of these little guys. It's a crucial aspect, especially if you're in the business of using or selling them. So, let's dive right in and break down the process.
First off, let's understand what we mean by luminous intensity. In simple terms, it's a measure of the amount of light emitted by a source in a particular direction. For IR COB LEDs, which emit infrared light, measuring this intensity helps us determine how effective they'll be in applications like night vision cameras, security systems, and more.
Why Measuring Luminous Intensity Matters
Before we get into the how - to, let's quickly touch on why it's so important. For us as a supplier, accurate measurement ensures that we're providing high - quality products that meet the specifications we claim. For you, the buyer, it means you can trust that the IR COB LEDs you're getting will perform as expected in your projects. Whether it's for a small DIY project or a large - scale industrial application, knowing the luminous intensity helps in making informed decisions.


Tools You'll Need
To measure the luminous intensity of an IR COB LED, you'll need a few essential tools. The most important one is a photometer. A photometer is a device that measures the intensity of light. There are different types of photometers available, but for measuring IR light, you'll need one that's sensitive to the infrared spectrum.
You'll also need a power supply to provide the right amount of power to the IR COB LED. Make sure the power supply can deliver a stable current and voltage, as any fluctuations can affect the measurement. Additionally, a dark room or an enclosure is necessary to eliminate any external light sources that could interfere with the measurement.
The Measurement Setup
Now, let's set up the measurement. First, place the IR COB LED in the center of the dark room or enclosure. Connect it to the power supply, making sure the connections are secure. Set the power supply to the recommended operating current and voltage for the specific IR COB LED you're testing.
Next, position the photometer at a fixed distance from the IR COB LED. The distance is important because the luminous intensity follows the inverse - square law, which means that the intensity decreases as the square of the distance from the source increases. A common distance used for measurement is 1 meter, but this can vary depending on the specific requirements.
Taking the Measurement
Once everything is set up, turn on the power supply and let the IR COB LED stabilize for a few minutes. This allows the LED to reach its steady - state operating condition. Then, use the photometer to measure the luminous intensity. Most photometers will give you a reading in candelas (cd), which is the standard unit for luminous intensity.
Take multiple readings at different angles around the IR COB LED. This is because the luminous intensity can vary depending on the direction of emission. By taking readings at different angles, you can get a more comprehensive understanding of the LED's performance.
Factors Affecting the Measurement
There are several factors that can affect the measurement of luminous intensity. Temperature is one of the most significant factors. As the temperature of the IR COB LED increases, its luminous intensity can decrease. So, it's important to measure the temperature during the test and take it into account when analyzing the results.
The quality of the IR LED Chip used in the COB LED also plays a role. Higher - quality chips tend to have more consistent and predictable luminous intensity. Additionally, the packaging of the IR COB LED can affect the measurement. Some packages may have better light - extraction efficiency, which can result in higher measured luminous intensity.
Calibration
To ensure accurate measurements, it's crucial to calibrate the photometer regularly. Calibration involves comparing the readings of the photometer with a known standard. You can use a calibrated light source to perform the calibration. This helps to correct any errors or inaccuracies in the photometer and ensures that your measurements are reliable.
Comparing Results
Once you've taken the measurements, it's a good idea to compare them with the specifications provided by the manufacturer. If the measured luminous intensity is significantly different from the specified value, there could be an issue with the LED or the measurement setup. In such cases, it's worth double - checking the connections, the power supply, and the calibration of the photometer.
Applications of Accurate Measurement
Accurate measurement of luminous intensity has a wide range of applications. In the security industry, for example, knowing the luminous intensity of IR COB LEDs helps in designing effective night - vision surveillance systems. In the automotive industry, it's important for applications like driver - assistance systems that use infrared sensors.
In the consumer electronics market, accurate measurement ensures that products like smart home devices with infrared features work as expected. For us as a Infrared COB LED supplier, it allows us to provide products that meet the diverse needs of our customers.
Conclusion
Measuring the luminous intensity of IR COB LEDs is a critical process that requires the right tools, proper setup, and careful consideration of various factors. By following the steps outlined above, you can get accurate measurements and make informed decisions about the performance of these LEDs.
If you're in the market for high - quality IR COB LEDs and need more information about their performance, including luminous intensity, don't hesitate to reach out. We're here to help you find the right products for your specific applications. Whether you're a small - scale hobbyist or a large - scale manufacturer, we have the expertise and the products to meet your needs. Let's start a conversation and see how we can work together to bring your projects to life.
References
- "Lighting Handbook: Reference and Application", Illuminating Engineering Society of North America
- "Introduction to Optics", Frank L. Pedrotti, Leno S. Pedrotti, and Leno M. Pedrotti






