Accurately calculating the luminous flux of IR COB (Chip-on-Board) LED is a crucial task, especially for those in the lighting and surveillance industries, where reliable infrared illumination is essential. As an IR COB LED supplier, I have witnessed firsthand the importance of understanding how to calculate luminous flux. Luminous flux, measured in lumens (lm), is a measure of the total amount of visible or in the case of IR, radiant energy emitted by a light source in all directions. In this blog post, I will guide you through the process of calculating the luminous flux of IR COB LED, and share some relevant insights and considerations.
Understanding the Basics of IR COB LED
Before delving into the calculation process, it's important to understand what an IR COB LED is. An IR COB LED combines multiple infrared LED chips on a single circuit board, providing a more powerful and concentrated infrared light source compared to traditional single-chip LEDs. This makes it an ideal choice for applications such as night vision cameras, security systems, and industrial sensing.
Factors Affecting Luminous Flux of IR COB LED
The luminous flux of an IR COB LED is influenced by several factors:
- Number of LED Chips: The more LED chips integrated on the COB board, the higher the potential luminous flux. Each chip emits a certain amount of infrared radiation, and the cumulative effect increases the overall output.
- Efficiency of LED Chips: The efficiency of individual IR LED Chip varies. High-efficiency chips convert a larger proportion of electrical energy into infrared radiation, resulting in a higher luminous flux for the same power input.
- Driving Current: The luminous flux of an IR COB LED is directly related to the driving current. Within a certain range, increasing the current can boost the luminous flux. However, exceeding the recommended maximum current can lead to overheating and a decrease in lifespan.
- Heat Dissipation: Effective heat dissipation is crucial for maintaining the performance of IR COB LEDs. Overheating can cause a decrease in luminous flux and even permanent damage to the LEDs.
Calculation Methods
There are two main methods for calculating the luminous flux of IR COB LED: theoretical calculation and practical measurement.
Theoretical Calculation
The theoretical calculation of luminous flux is based on the specification parameters provided by the LED chip manufacturer. Here are the general steps:
- Determine the Luminous Flux per Chip: Check the datasheet of the IR LED Chip to find the typical luminous flux value per chip at a specific driving current. For example, if the datasheet states that a single chip has a luminous flux of 100 lm at a driving current of 350 mA.
- Count the Number of Chips: Count the total number of LED chips integrated on the COB board. Suppose there are 10 chips on the COB board.
- Calculate the Total Luminous Flux: Multiply the luminous flux per chip by the number of chips. In our example, the total luminous flux would be (100 \text{ lm/chip} \times 10 \text{ chips} = 1000 \text{ lm}).
However, this method provides an idealized value and does not take into account factors such as the efficiency of the COB board, heat dissipation, and interaction between chips.


Practical Measurement
Practical measurement is a more accurate way to determine the luminous flux of an IR COB LED. Here are the steps:
- Prepare the Measurement Equipment: You will need an integrating sphere and a spectrometer. The integrating sphere is used to collect and evenly distribute the light emitted by the LED, while the spectrometer is used to measure the spectral power distribution.
- Set up the Measurement Environment: Place the IR COB LED at the center of the integrating sphere and connect it to a power supply. Make sure the connection is stable and the driving current is set to the desired value.
- Take the Measurement: Use the spectrometer to measure the spectral power distribution of the light collected by the integrating sphere. The spectrometer will provide data on the intensity of the light at different wavelengths.
- Calculate the Luminous Flux: Based on the measured spectral power distribution, use the following formula to calculate the luminous flux:
[
\Phi_v = 683 \int_{380}^{780} V(\lambda) P(\lambda) d\lambda
]
where (\Phi_v) is the luminous flux in lumens, (V(\lambda)) is the luminous efficiency function of the human eye, and (P(\lambda)) is the spectral power distribution of the light source.
In the case of IR COB LED, since the light is in the infrared range, we usually measure the radiant flux (in watts) instead of the luminous flux. Radiant flux is a measure of the total amount of electromagnetic radiation emitted by a source, regardless of the wavelength.
Considerations for Calculating Luminous Flux
- Temperature Effects: As mentioned earlier, temperature has a significant impact on the performance of IR COB LEDs. High temperatures can reduce the luminous flux and shorten the lifespan of the LEDs. Therefore, it's important to consider the operating temperature when calculating the luminous flux.
- Dimming: If you plan to use dimming to control the output of the IR COB LED, keep in mind that the relationship between the dimming level and the luminous flux is not always linear. Some dimming methods may cause a decrease in efficiency, resulting in a lower luminous flux than expected.
- Optical Design: The optical design of the IR COB LED system, such as the reflector or lens used, can also affect the luminous flux. A well-designed optical system can focus the light in a desired direction, increasing the effective luminous flux in the targeted area.
Applications of IR COB LED
IR COB LED has a wide range of applications, including:
- Security and Surveillance: IR COB LEDs are commonly used in night vision cameras and security systems to provide illumination in low-light conditions. Their high luminous flux and long-range capabilities make them ideal for monitoring large areas.
- Industrial Sensing: In industrial applications, IR COB LEDs are used for object detection, distance measurement, and motion sensing. Their ability to emit infrared light with high precision and stability makes them suitable for various sensing tasks.
- Automotive: IR COB LEDs are also used in automotive applications, such as night vision systems and driver assistance systems. They can enhance the visibility of the road at night and improve the safety of driving.
Conclusion
Calculating the luminous flux of IR COB LED is a complex but important process that requires a good understanding of the LED technology and the relevant measurement methods. By considering the factors that affect luminous flux and using the appropriate calculation method, you can ensure that the IR COB LED you choose meets your specific requirements.
As an established IR COB LED supplier, we are committed to providing high-quality products and professional technical support. Whether you need a 100W IR LED for large-scale surveillance or an IR LED Bar for industrial sensing, we have the right solution for you. If you have any questions or need further information, please feel free to contact us to discuss your procurement needs.
References
- "LED Lighting Handbook"
- Datasheets of IR LED Chips
- Technical documents from integrating sphere and spectrometer manufacturers






